Reset your roland sound module

Simply follow the suggestions below and your ROLAND sound module should be returned to factory presets; or "reinitialized".


CA30	resets every time you turn it off and then back on.
CDX1	Press UTILITY. Cursor RIGHT > to select INIT and press ENTER. Cursor < or > to select GLOBAL and press ENTER three times.
CR80	Power on while holding down the DEL and REPEAT buttons, then press the ENTER button.
D2	While holding down WRITE, press SYSTEM. Then press ENTER twice.
D5, D10, D110, D20, D550, D70	NO RESET
DDR30	Power on while holding down the #1 button.
DEP3	Power on while holding down the MERMORY NO UP and DOWN buttons.
DEP5	Power on while holding down the MEMORY NO UP and DOWN buttons.
DJ70, DJ70MKII, DM80, DM800	NO RESET.
DR202	Power on while holding down MUTE and ROLL. Use the VALUE DIAL to select ALL and press TAP/ENTER twice.
DR5	Power on while holding down the FRET LEFT (<) and RIGHT (>) buttons, then press ENTER twice.
DR550	Power on while holding down the -1 and +1 buttons, then press the START button.
DR550MKII	Power on while holding down the -1 and +1 buttons, then press the START button.
DR660	Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press the ENTER button twice
DR670	Power on while holding down the REC and STOP/CONT buttons, then press ENTER twice.
DR770	Press UTILITY then CURSOR (>) to 9.F.RST. Use the VALUE DIAL to select ALL and press ENTER twice.
DS330	Power on while holding down REVERB and SPLIT, then press the YES button.
E10	Power on while holding WRITE
E12	NO RESET
E14, e15, e16	The unit resets each time you turn it on
E20	Power on while holding WRITE
E28	The unit resets each time you turn it on
E30	Power on while holding WRITE
E300	Press UTILITY, use the buttons under PAGE to select FACTORY PRESET press EXECUTE, then OK. When screen shows RESET COMPLETE, power off, then on
E35	Power on while holding REC/PUNCH IN
E36	Power on while holding RECORDER
E38	The unit resets each time you turn it on
E5	NO RESET
E500	Press UTILITY, use the buttons under PAGE to select FACTORY PRESET press EXECUTE, then OK. When screen shows RESET COMPLETE, power off, then on
E56	Power on while holding WRITE
E600	PresS FUNCTION, use the PAGE buttons so the screen reads FACTORY PRESET, then toUCH EXECTUE
E66	Power on while holding REC
E70	Power on while holding WRITE
E86	Power on while holding WRITE
E96	Power on while holding WRITE
EF303	Power on while holding down SHIFT. Press WRITE twice. Turn the power OFF and On again.
EM10, EM20	Power on while holding WRITE
EM30, EM50	Power on while holding WRITE
EP-mkII	While holding REC and PLAY, press STRINGS. Power off then on
EP7	While holding REC and PLAY, press STRINGS. Power off then on
EP75, EP85	Power on while holding REC
EP9	While holding REC and PLAY, pres CHOIR. Power off and then on
EP95	Power on while holding REC