|
|
|
FA76 |
Press MENU, then (UP) or (DOWN) to select FACTORY RESET. Press F8 (SELECT) then F8 (EXECUTE) to reset. |
|
FANTOM |
Press MENU, then (UP) or (DOWN) to select FACTORY RESET. Press F8 (SELECT) then F8
(EXECTUE) to reset. |
|
FC100 |
NO RESET |
|
FC100MKII |
Power on while holding pedals #1, #2 and #8. |
|
FC200 |
Power on while holding the #10 pedal, then press the CTL pedal. |
|
FG10 |
Power on while holding down the CLEAR and EXIT buttons. |
|
FG1000 |
Power on while holding down the CLEAR and EXIT buttons. |
|
FP1 |
The unit resets each time you turn it on |
|
FP8 |
Press FUNC and release. While holding PIANO, press FUNC again |
| FP9 |
The unit resets each time you turn it on |
|
G600 |
Power on while holding WRITE |
|
G800 |
Power on while holding WRITE |
| GC8 |
NO RESET |
|
GI10 |
Power on while holding down the PARAMETER + and - buttons, then press the VALUE + button. |
|
GM70 |
Poly Mode: Power on while holding down PLAY, GENERAL EDIT and IND EDIT. Mono Mode: Power on
while holding down TUNE, CONTROL ASSIGN, and DATA TRANSFER. |
|
GP100 |
Power on while pressing in the PARAMETER KNOB, then press WRITE. |
|
GP16 |
Power on while holding down the #6, #7 and #8 buttons. Use the FUNCTION (<) and (>) buttons to select "2.All Factory Preset", then press WRITE three times. |
|
GP8 |
NO RESET |
|
GR09 |
Power on while holding down the #2 pedal, then press the VALUE + button, followed by the EDIT/PLAY button. |
|
GR1 |
Power on while holding down the WRITE/COPY button, then press YES
GR30 Power on while holding down the #2 pedal, then press the PATCH + button to select
INI. Press the EDIT/PLAY button and then the PATCH + and PATCH - buttons simultaneously. |
|
GR33 |
Press SYSTEM and then PARAMETER. Use the VALUE DIAL to select ALL in the display. Press WRITE twice. |
|
GS6 Guitar Processor |
Power on, while holding cursor down & cursor right
when fp displayed, press write |
|
GT3 |
Power on while holding down MOD and
SFX. Press WRITE. |
|
GT5 |
Power on while holding down MOD and
FEEDBACKER/SLOWGEAR. Press WRITE. |
|
GT6 |
Power on while holding down PREAMP SPEAKER ON/OFF and TYPE VARIATION. Press ENTER. |
| gT6B |
Power on while holding down COMPRESSOR/LIMITER ON/OFF and TYPE VARIATION. Press ENTER |
|
GX700 |
Press TUNER/UTILITY. Use PARAMETER (<) and (>) to select FACT INIT. Cursor LEFT and dial SYSTEM then cursor RIGHT and dial P#100. Press WRITE and then TUNER/UTILITY. |
|
HPD15 |
Press SYSTEM, then PARAMETER (>) RIGHT to "Factory Reset". Use the PATCH/VALUE DIAL to select ALL and press WRITE |
