|
|
|
ROLAND M760 |
HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SEL
ECT ALL + PRESS WRITE. ON COMPLETION PRESS ED
IT TO RETURN TO PLAY. |
|
ROLAND MDC1 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MGS64 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MOC1 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MSE1 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MVS1 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MBD1 |
HOLD F3 AND THEN POWER ON. |
|
ROLAND MC SERIES; EXC303 |
NO RESET |
|
ROLAND MC303 |
HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER. |
|
ROLAND ME10 |
HOLD BANK DOWN PEDAL, THEN PRESS WRITE. |
|
ROLAND ME5 |
HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMEDIATELY. |
|
ROLAND ME6 |
HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. |
|
ROLAND ME6B |
HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. |
|
ROLAND ME8 |
HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY. |
| PAD8
|
Power on
while holding down the MIDI CH and NOTE NUMBER. Power the unit OFF and then back ON again.
|
|
PAD80
|
Power on while holding down both the VALUE buttons.
|
|
PK5
|
Power on while holding
OCT/PARAM
|
|
PK7
|
NO RESET |
|
R5
|
Power on while holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
|
|
R70
|
Power on while holding down the MIDI and ASSIGN buttons.
|
|
R8
|
Power on while holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
|
|
R880
|
NO RESET |
|
R8M
|
Power on while holding down ENTER and RIGHT (>) CURSOR, then press the ENTER button twice.
|
|
R8MKII
|
Power on while holding down CUROR PAGE and PARAM SELECT, then press the ENTER button twice.
|
|
RA30
|
The unit resets
ON POWER ON |
|
RA50
|
POWER
ON WHILE HOLDING WRITE |
| RA90 |
POWER
ON WHILE HOLDING WRITE |
|
RA800
|
POWER
ON WHILE HOLDING WRITE |
|
RA95
|
Power on while holding REC
|
|
RD100
|
NO RESET |
|
RD500
|
Power on while holding down the NUMBER 1 and 8 buttons, then press DEC/YES.
|
|
RD600
|
Press EDIT, then the RIGHT PAGE button until "INITIALIZE ALL" is displayed. Press INC/YES twice. Press EDIT to return to the play mode.
|
|
RD600
|
Press EDIT, use page button to display INT ALL, press YES twice and EDIT to return to play mode
|
|
RD700
|
Press EDIT, then press TONE SWITCH 9. Press ENTER then CURSOR DOWN to FACTORY RESET ALL. Press ENTER and then the YES button.
|
|
RS5
|
Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
|
|
RS9
|
Press UTILITY. Use the VALUE + or - to select "FACTORY RESET" then press ENTER.
|
|
RSP550
|
Power on while holding down PROGRAM, PAGE UP and PAGE DOWN. Then press WRITE.
|
|
RSS10
|
Power on while holding down LOCK and OPTION.Press DEMO PROGRAM four times. Then press DEVICE ID.
|
|
RSS8040
|
NO RESET |
|
RV70
|
Power on while holding down WRITE and DOWN. Use the UP and DOWN buttons to select ALL. Press WRITE, then power the unit OFF and back On again.
|
