|
|
|
SC88
|
While holding SELECT, press both INSTRUMENT buttons, then press ALL
|
|
SC88pro
|
While holding SELECT, press both INSTRUMENT buttons, then press ALL
|
|
SD35
|
Power on while holding CLEAR, then press REC
|
|
SDD320
|
NO RESET |
|
SDE330
|
Power on while holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
|
|
SDX330
|
Power on while holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
|
|
SE50
|
Power on while holding down PARAM UP and VALUE UP. Press WRITE, wait for three seconds and the press WRITE again..
|
|
SE70
|
Power on while holding in the NUMBER/VALUE knob, press PARAMETER (<) LEFT. Use the NUMBER/VALUE knob to select STANDARD mode or GUITAR mode. Press WRITE.
|
|
SH101
|
NO RESET |
|
SH2000
|
NO RESET |
|
SH32
|
Power on while holding down (1/A), press VALUE UP/DOWN to display ALL in the screen. Press WRITE twice.
|
|
SN700
|
NO RESET |
|
SP202
|
Power on
wHILE holding down the SOURCE pad.
|
|
SP303
|
Power on while holding down CANCEL, REMAIN and DEL, then press REC.
|
|
SP505
|
Press SONG, then SYSTEM. Press F1(UTILITY) then F3(INIT). Use the VALUE DIAL to select ALL and press F1 twice to execute the operation. Press PTN or SONG to return to the play screen.
|
|
SP700
|
NO RESET |
|
SP808
|
Press SYSTEM/DISK and
CURSOR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
|
|
SP808EX
|
Press SYSTEM/DISK and
CURSOR DOWN to "Init System Parameters?". Press ENTER/YES twice and then press PLAY to return to the basic screen.
|
|
SPD11
|
Power on while holding down ALL/ENTER and DOWN. Then press ALL/ENTER again.
|
|
SPD20
|
Power on while holding down the CURSOR DOWN and ALL/ENTER. Press the ALL/ENTER button again. |
|
SPD8
|
Power on while holding down EDIT, then press COPY. Use the VALUE UP and DOWN to select
"F_A_L" in the screen. Press ALL/ENTER.
|
|
SRC2
|
NO RESET |
|
SRV1000
|
NO RESET |
|
SRV2000
|
Power on while holding down the WRITE and REVERB NON LINEAR buttons.
|
|
SRV3030
|
Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
|
|
SRV3030D
|
Press MEMORY. Use the NUMBER/PAGE DIAL to display "FACTORY RESET" . Rotate PARAM 3 to set the target to ALL, then press ENTER twice.
|
|
SRV330
|
Power on while holding down SYSTEM and PROGRAM. Use the DATA DIAL to select SYSTEM + PROGRAM. Press MEMORY.
|
|
SSC8004
|
NO RESET |
|
SX700
|
Press UTILITY. Use PARAMETER (<) LEFT and (>) RIGHT to select FACT INIT, then press WRITE.
|
